Fixed Speed Setpoints - Siemens SINAMICS G130 Operating Instructions Manual

Signal flow diagram
Figure 6-18
Function diagram
FD 3020
Parameter
• p1030
• p1037
• p1038
• p1047
• p1048
• r1050
6.5.3

Fixed speed setpoints

Description
A total of 15 variable fixed speed setpoints are available.
The default setting specified for the setpoint sources during commissioning via STARTER or
the operating panel makes three fixed speed setpoints available. They can be selected via
terminals or fieldbus.
Inverter chassis units
Operating Instructions, 07/2016, A5E00331449A
Signal flow diagram: Motorized potentiometer
Motorized potentiometer
Motorized potentiometer, configuration
Motorized potentiometer, maximum speed
Motorized potentiometer, minimum speed
Motorized potentiometer, ramp-up time
Motorized potentiometer, ramp-down time
Motorized potentiometer, setpoint after the ramp-function generator
Operation
6.5 Setpoint sources
215