Siemens SINAMICS G130 Operating Instructions Manual page 34

Mechanical installation
3.2 Transportation and storage
Note
Notes regarding transportation
• The devices are packaged by the manufacturer in accordance with the climatic conditions
and stress encountered during transit and in the recipient country.
• The notes on the packaging for transportation, storage, and proper handling must be
observed.
• For transportation using forklifts, the devices must be set down on a wooden pallet.
• When the devices are unpacked, they can be transported using the attached transport
eyebolts. The load must be distributed evenly. Chains attached to the transport eyebolts
must only be loaded vertically from above. Heavy blows or impacts must be avoided
during transit and when the devices are being set down, for example.
• Permissible ambient temperatures:
Ventilation: -25° to +70° C, class 2K3 according to IEC 60721-3-2
Briefly down to -40° C for max. 24 hours
Note
Notes regarding damage in transit
• Carry out a thorough visual inspection of the device before accepting the delivery from
the transportation company.
• Ensure that you have received all the items specified on the delivery note.
• Notify the transportation company immediately of any missing components or damage.
• If you identify any hidden defects or damage, contact the transportation company
immediately and ask them to examine the device.
• If you fail to contact them immediately, you may lose your right to claim compensation for
the defects and damage.
• If necessary, you can request the support of your local Siemens office.
Storage
The devices must be stored in clean, dry rooms. Temperatures between -25° C and +55° C
are permissible (class 1K4 according to EN 60721-3-1). Temperature variations greater than
20 K per hour are not permitted.
If the device is stored for a prolonged period once unpacked, cover it or take other
appropriate measures to ensure that it does not become dirty and that it is protected against
environmental influences. If such measures are not taken, the warranty becomes invalid in
the event of a claim for damages.
34
Inverter chassis units
Operating Instructions, 07/2016, A5E00331449A