Using Crane Lifting Lugs To Transport Power Blocks - Siemens SINAMICS G130 Operating Instructions Manual

11.3.3

Using crane lifting lugs to transport power blocks

Crane lifting lugs
The power blocks are fitted with crane lifting lugs for transportation on a lifting harness in the
context of replacement.
The positions of the crane lifting lugs are illustrated by arrows in the figures below.
NOTICE
Damage to the device due to improper transport
Improper transport can subject the power block housing or the busbars to mechanical
loads, which damage the device.
• When transporting the power blocks, use a lifting harness with vertical ropes or chains.
• Do not use the power block busbars to support or secure lifting harnesses.
Figure 11-2
Inverter chassis units
Operating Instructions, 07/2016, A5E00331449A
Crane lifting lugs on FX, GX power block
Maintenance and servicing
11.3 Maintenance
513