Siemens SINAMICS G130 Operating Instructions Manual page 135

Figure 5-8
⇒ Click Continue > to set up a drive unit in the project wizard.
Figure 5-9
⇒ Choose the following data from the list fields:
Device: Sinamics
Type: G130 CU320-2 DP or G130 CU320-2 PN
Version: 4.8
Target device address: the corresponding bus address for the converter.
The entry in the Name: can be freely selected.
⇒ Click Insert
The selected drive unit is displayed in a preview window in the project wizard.
Inverter chassis units
Operating Instructions, 07/2016, A5E00331449A
Complete setting the interface
Inserting the drive unit
5.3 Procedure for commissioning via STARTER
Commissioning
135