Siemens SINAMICS G130 Operating Instructions Manual page 288

Operation
6.10 Communication via EtherNet/IP
Table 6- 32
Byte Bit
1
2
Assembly Object, Instance Number: 4 hex
Supported services
Class
Table 6- 33
No.
1
2
3
Table 6- 34
No.
3
288
Explanation for No. 5 of the previous table
Name
0 Owned
1
2 Configured
3
4 ... 7 Extended De-
vice Status
8 ... 11
12 ... 15
• Get Attribute single
Class Attribute
Service Type
get UINT16
get UINT16
get UINT16
Instance Attribute
Service Type Name
get Array of Assembly
UINT8
Description
0: Inverter is not assigned to any master
1: Inverter is assigned to a master
Reserved
0: EtherNet/IP basic settings
1: Modified EtherNet/IP settings
Reserved
0: Self-test or status not known
1: Firmware update active
2: At least one I/O connection with error
3: No I/O connections
4: Incorrect configuration in the ROM
5: Fatal fault
6: At least one I/O connection is active
7: All I/O connections in the quiescent state
8 ... 15: Reserved
Not used
Reserved
Instance
Name
Revision
Max Instance
Num of Instances
Value/explanation
1 byte array
Operating Instructions, 07/2016, A5E00331449A
• Get Attribute single
• Set Attribute single
Inverter chassis units