Siemens SINAMICS G130 Operating Instructions Manual page 139

Selecting options
Figure 5-14
⇒ From the combination box Options selection: select the options belonging to your drive
unit by clicking on the corresponding check box.
NOTICE
Damage to the sine-wave filter if it is not activated during commissioning
The sine-wave filter may be damaged if it is not activated during commissioning.
• Activate the sine-wave filter during commissioning by activating the appropriate
Inverter chassis units
Operating Instructions, 07/2016, A5E00331449A
Selecting options
checkbox (option SIN).
5.3 Procedure for commissioning via STARTER
Commissioning
139