Siemens SINAMICS G130 Operating Instructions Manual page 601

Parameter macro p1000 = 4: Fixed setpoint (100004)
This macro is used to set the fixed setpoint as the setpoint source.
Table A- 9 Parameter macro p1000 = 4: Fixed setpoint
Parameters
p1070 Main setpoint
p1071 Main setpoint scaling
p1075 Supplementary setpoint
p1076 Supplementary setpoint scaling
Inverter chassis units
Operating Instructions, 07/2016, A5E00331449A
Sink
Description
Vector
Vector
Vector
Vector
DO Parameters
r1024 Active fixed setpoint
1 100 %
0
1 100 %
Appendix
A.2 Parameter macros
Source
Description
Vector
Vector
Vector
Vector
DO
601