Overview Of Important Parameters - Siemens SINAMICS G130 Operating Instructions Manual

Functions, monitoring, and protective functions
9.3 Extended functions
9.2.23.5

Overview of important parameters

• r8911
• r8931
• p8986
• p8987[0...1]
9.3 Extended functions
9.3.1 Technology controller
Description
The "technology controller" function module allows simple control functions to be
implemented, e.g.:
● Level control
● Temperature control
● Dancer roll position control
● Pressure control
● Flow control
● Simple control without higher-level control
● Tension control
The technology controller features:
● Two scalable setpoints
● Scalable output signal
● Separate fixed values
● Integrated motorized potentiometer
● The output limits can be activated and deactivated via the ramp-function generator.
● The D component can be switched to the system deviation or actual value channel.
● The motorized potentiometer of the technology controller is only active when the drive
pulses are enabled.
The technology controller is designed as a PID controller, whereby the differentiator can be
switched to the control deviation channel or the actual value channel (factory setting). The P,
I, and D components can be set separately.
450
IE IP Address of Station active
PN IP Address of Station active
Web server configuration
Web server port assignment
Inverter chassis units
Operating Instructions, 07/2016, A5E00331449A