Siemens SINAMICS G130 Operating Instructions Manual page 132

Commissioning
5.3 Procedure for commissioning via STARTER
Figure 5-5
⇒ Under Access point: select the interface corresponding to your device configuration from:
● Select the S7ONLINE access (STEP7), if the connection to the drive unit is established
via PROFINET or PROFIBUS.
● Select the DEVICE access, if the connection to the drive unit is established via the
Ethernet interface.
⇒ Click PG/PC ... and set up the interface in accordance with your device configuration.
The Properties..., Copy... and Select... pushbuttons are now active.
132
Set up interface
Inverter chassis units
Operating Instructions, 07/2016, A5E00331449A