Applications, Features - Siemens SINAMICS G130 Operating Instructions Manual

Device overview

2.4 Applications, features

2.4 Applications, features
2.4.1 Applications
SINAMICS G130 chassis units are specially designed to meet the requirements of variable-
speed drives with a quadratic and constant load characteristic, medium performance
requirements, and no regenerative feedback.
As a result, SINAMICS G130 chassis units are a cost-effective drive solution for all types of
industrial applications that involve moving, conveying, pumping, compressing, or extracting
solids, liquids, or gases.
2.4.2 Features, quality, service
Features
From configuration to operation, SINAMICS G130 built-in units are easy to use and offer the
following benefits:
● Compact, modular, service-friendly design.
● Straightforward engineering and commissioning thanks to the support using SIZER and
STARTER tools.
● Ready to connect to facilitate the installation process.
● Quick and easy commissioning thanks to practical menu guidance and integrated
optimization routines.
● Drive monitoring/diagnostics, commissioning and operation optionally realized using a
user-friendly graphic operator panel with measured values displayed in plain text or in a
quasi-analog bar display.
● SINAMICS is an integral part of Totally Integrated Automation (TIA). The TIA concept
offers an optimized range of products for automation and drive technology. This concept
is characterized by planning / design, communication, and data management procedures
that are consistent throughout the product range. SINAMICS is fully integrated in the TIA
concept.
Separate S7/PCS7 blocks and faceplates for WinCC are available.
● Integration in SIMATIC H systems is possible via a Y link.
● Drive Control Chart (DCC)
Drive Control Chart (DCC) expands the facility for the simplest possible configuring of
technological functions for the SINAMICS drive system.
The block library encompasses a large selection of closed-loop, arithmetic and logic
function blocks, as well as more comprehensive open-loop and closed-loop control
functions. The user-friendly DCC editor enables easy graphical configuration and a clear
representation of control loop structures as well as a high degree of reusability of existing
diagrams. DCC is an add-on to the STARTER commissioning tool.
28
Inverter chassis units
Operating Instructions, 07/2016, A5E00331449A