Siemens SINAMICS G130 Operating Instructions Manual page 174

Commissioning
5.5 First commissioning with the AOP30
Basic commissioning: Selecting the motor type and entering the motor data
174
You can select the motor standard and type
in the dialog screen.
The following is defined for the motor stand-
ard:
0: Line frequency 50 Hz, motor data in kW
1: Line frequency 60 Hz, motor data in hp
The corresponding motor is selected for the
motor type.
Entering the motor data specified on the type
plate.
To navigate through the selection fields,
choose <F2> or <F3>.
To activate a selection, choose <F5>.
To change a parameter value, navigate to the
required selection field and activate with
<F5>.
The system displays another window in
which you can:
• Enter the value directly, or
• Select the value from a list.
When you have finished entering the motor
data, choose "Continue" below the final pa-
rameter value and activate with <F5>.
Operating Instructions, 07/2016, A5E00331449A
Inverter chassis units