Siemens SINAMICS G130 Operating Instructions Manual page 582

Technical specifications
12.3 Technical specifications
Article number
Recommended fuses
- Line protection
without semiconductor protection
Rated current
frame size to IEC 60269
- Line and semiconductor protection
Rated current
Frame size to IEC 60269
Minimum short-circuit current
Rated output of a typ. 6-pole standard induction motor based on I
1)
The base-load current I
2)
(see "Overload capability").
The base-load current I
3)
(see "Overload capability").
If the auxiliary supply is to be fed in separately from the load supply, e.g., if the control should be able to continue com-
4)
munication if the line voltage fails.
The minimum current required to reliably trigger 3NE1 protective devices.
5)
582
6SL3310-
A
A
A
5)
is based on a duty cycle of 110% for 60 s or 150% for 10 s with a duty cycle duration of 300 s
L
is based on a duty cycle of 150% for 60 s or 160% for 10 s with a duty cycle duration of 300 s
H
1GH34-7AAx 1GH35-8AAx
3NA3252-6 3NA3354-6
2 x 315 2 x 355
2 3
3NE1435-2 3NE1447-2
560 670
3 3
6200 8400
or I at 690 V 3 AC 50 Hz.
L H
Operating Instructions, 07/2016, A5E00331449A
1GH37-4AAx
3NA3365-6
2 x 500
3
3NE1448-2
850
3
10500
Inverter chassis units