Siemens SINAMICS G130 Operating Instructions Manual page 169

Converter built-in units 75 kw-800 kw

Hide thumbs Also See for SINAMICS G130:

Table of Contents

11.The SINAMICS drive is displayed as drive object in the project navigator.

12.You can now configure the drive unit (see Chapter "Configuring the drive unit").

Storage location of the IP address

The IP address and device name are stored on the memory card of the Control Unit (non-

Parameters can also be used to modify and/or display the properties of the Ethernet

Inverter chassis units

Operating Instructions, 07/2016, A5E00331449A

IE name of station

IE IP address of station

IE default gateway of station

IE subnet mask of station

IE DHCP mode

IE interface configuration

IE name of station active

IE IP address of station active

IE default gateway of station active

IE subnet mask of station active

IE DHCP mode of station active

IE MAC address of station

5.3 Procedure for commissioning via STARTER

Commissioning