Fixed Speed Setpoint As Setpoint Source - Siemens Sinamics CU240D-2 DP Operating Instructions Manual

Advanced commissioning
6.12 Setpoints
6.12.5

Fixed speed setpoint as setpoint source

Function description
Figure 6-29
The inverter makes a distinction between two methods when selecting the fixed speed
setpoints:
Directly selecting a fixed speed setpoint
You set 4 different fixed speed setpoints. Up to 16 different setpoints are obtained by adding
one or several of the four fixed speed setpoints.
Figure 6-30
Selecting the fixed speed setpoint, binary
You set 16 different fixed speed setpoints. You precisely select one of these 16 fixed speed
setpoints by combining four selection bits.
172
Fixed speed setpoint as setpoint source
Direct selection of the fixed speed setpoint
Converter with the control units CU240D-2
Operating Instructions, 04/2018, FW V4.9 SP10, A5E34262100B AF