Wall Mounting The Multiline Terminal; Wall Mounting A Multiline Terminal Using The Base Plate; Adjusting The Hanger Hook - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
4.10
System Hardware Manual

Wall Mounting the Multiline Terminal

You can wall mount a DT300/DT700 Series connection Multiline Terminal
using the base cover or an optional wall mount unit. A wall mount unit must be
used if adapters are installed on the Multiline Terminal.
4.10.1

Wall Mounting a Multiline Terminal using the Base Plate

4.10.1.1

Adjusting the Hanger Hook

1.
2.
3.
Remove the hook from the unit.
Hanger Hook
Figure 5-43 Removing the Hanger Hook on a
DT300/DT700 Series Terminal
Turn the hook with the tab toward the top.
Slide the hook until it glides into position forming the
hanger hook for the handset.
Figure 5-44 Sliding the Hanger Hook into Position
Issue 1.0
5 - 43