Connecting An Option Card; Connecting An Option Card; Verifying The Option Card And Product Type; Connecting The Option Card - YASKAWA CIMR-VU BA0001 Technical Manual

8.6 Connecting an Option Card

8.6

Connecting an Option Card

The drive can communicate with other devices through a specially designed option card. The following section describes how
to install an option card.
Refer to option card manual for detailed installation instructions.
Note: Refer to Available Communication Options on page 337
u

Verifying the Option Card and Product Type

A – Option card
B – Option card cover installation
C – Tabs for mounting front cover
D – Comm. connector (CN1)
E – Ground lead connection
u

Connecting the Option Card

1.
Loosen the screw on the front cover of the drive to remove the cover.
2.
Remove the terminal cover. Connect the lead from the option card to the drive ground terminal.
A – Ground terminal
B – Ground lead
3.
Reattach the terminal cover.
338
screw holes
Figure 8.12 Remove Cover
Figure 8.13 Connect Lead
for a list of option cards for use with this product.
A
B
C
D
E
F
F – Wire through-hole
G – Option card cover
H – Cover screw
I – Ground lead
Figure 8.11 Option Card
A
B
C
C – Terminal cover
YASKAWA ELECTRIC SIEP C710606 18F YASKAWA AC Drive – V1000 Technical Manual
G
H
I