Table of Contents
Advertisement
Reducing the light emitted from the display presentation
When the bridge is dark, the light emitted by the SN90 display can affect your night
vision. In order to compensate for this, you can reduce the intensity
Context
The intensity of the light given off by the SN90 presentation can be adjusted. You can
use this function to increase or decrease the light from the screen to match the ambient
light. The intensity of light emitted by the display can be reduced from 100% to 0%
in steps of 1.
Procedure
1
Open the
Display
2
Select a
Screen Brightness
the right side of the button to increase the value. Select the middle of the button to
open it.If you have a keyboard connected to the SN90, type the requested value.
Related topics
Defining settings related to user preferences and individual customizing, page 102
Increasing the visibility of the information panes
When you open an information pane, you will see that it is transparent. This transparency
allows you to see the echoes behind the pane, but it may also reduce the visibility
of the information in it.
Context
The information panes provided by the SN90 can be placed anywhere on top of the
Inspection views in the presentation.
In order not to loose information, the panes have been designed so you can see through
them. The degree of transparency can be controlled with this
can adjust the setting from 0% (no transparency) to 90% (almost full transparency)
in steps of 1%.
Procedure
1
Open the
Display
381295/B
menu.
setting that fits your requirements.
menu.
To change the setting, move the cursor to
either side of the button. Select the left side
of the button to decrease the value. Select
Transparency
Operating procedures
function. You
107
Advertisement
Table of Contents
