Show Traffic Control - D-Link DGS-1100-16/ME Reference Manual

DGS-1100-24P/ME:admin#

show traffic control

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display traffic control setting:
DGS-1100-24P/ME:admin#show traffic control ports 1-3
Command : show traffic control ports 1-3
Port Type
-----
eth1 None
eth2 None
eth3 Broadcast
Total Entries: 3
DGS-1100-24P/ME:admin#
DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
To display current traffic control settings.
show traffic control {ports<portlist>}
The show traffic control command displays the current storm traffic
control configuration on the Switch.
ports <portlist> - A port or range of ports whose settings are to be
displayed.
None.
Threshold
----------------- -----------
No Limit
No Limit
1M bps
68