Edge-Core ECS4660-28F Management Manual page 373

Dynamic VLAN – Enables dynamic VLAN assignment for an
◆
authenticated port. When enabled, any VLAN identifiers returned by the
RADIUS server through the 802.1X authentication process are applied
to the port, providing the VLANs have already been created on the
switch. (GVRP is not used to create the VLANs.) (Default: Enabled)
The VLAN settings specified by the first authenticated MAC address are
implemented for a port. Other authenticated MAC addresses on the
port must have the same VLAN configuration, or they are treated as
authentication failures.
If dynamic VLAN assignment is enabled on a port and the RADIUS
server returns no VLAN configuration, the authentication is still treated
as a success, and the host is assigned to the default untagged VLAN.
When the dynamic VLAN assignment status is changed on a port, all
authenticated addresses mapped to that port are cleared from the
secure MAC address table.
Dynamic QoS – Enables dynamic QoS assignment for an
◆
authenticated port. (Default: Disabled)
MAC Filter ID – Allows a MAC Filter to be assigned to the port. MAC
◆
addresses or MAC address ranges present in a selected MAC Filter are
exempt from authentication on the specified port (as described under
"Configuring a MAC Address
W I
EB NTERFACE
To configure MAC authentication on switch ports:
Click Security, Network Access.
1.
Select Configure Interface from the Step list.
2.
Click the General button.
3.
Make any configuration changes required to enable address
4.
authentication on a port, set the maximum number of secure addresses
supported, the guest VLAN to use when MAC Authentication or 802.1X
Authentication fails, and the dynamic VLAN and QoS assignments.
Click Apply.
5.
– 373 –
C 13
HAPTER
Network Access (MAC Address Authentication)
Filter"). (Range: 1-64; Default: None)
| Security Measures