Edge-Core ECS4660-28F Management Manual page 374

| Security Measures
C 13
HAPTER
Network Access (MAC Address Authentication)
C
ONFIGURING
P L D
ORT INK ETECTION
Figure 185: Configuring Interface Settings for Network Access
Use the Security > Network Access (Configure Interface - Link Detection)
page to send an SNMP trap and/or shut down a port when a link event
occurs.
CLI R
EFERENCES
"Network Access (MAC Address Authentication)" on page 1095
◆
P
ARAMETERS
These parameters are displayed:
Link Detection Status – Configures whether Link Detection is enabled
◆
or disabled for a port.
◆ Condition – The link event type which will trigger the port action.
Link up – Only link up events will trigger the port action.
■
Link down – Only link down events will trigger the port action.
■
Link up and down – All link up and link down events will trigger
■
the port action.
Action – The switch can respond in three ways to a link up or down
◆
trigger event.
Trap – An SNMP trap is sent.
■
Trap and shutdown – An SNMP trap is sent and the port is shut
■
down.
Shutdown – The port is shut down.
■
– 374 –