Suzuki Wagon R Manual page 777

7B-66 AUTOMATIC TRANSMISSION (4 A / T)
TRANSMISSION UNIT REPAIR
OVERHAUL
DISMOUNTING
1) Take down transmission with engine. For its procedure, refer to
Section 6A1.
2) Remove torque converter housing lower plate (1).
3) Remove drive plate bolts.
To lock drive plate (1), engage a flat head rod or the like (2) with
drive plate gear.
4) Remove starting motor.
5) Remove bolts and nut fastening engine and transmission, then
detach transmission from engine.
NOTE:
When detaching transmission from engine, move it in paral-
lel with crankshaft and use care so as not to apply exces-
sive force to drive plate and torque converter.
WARNING:
Be sure to keep transmission with torque converter hori-
zontal or facing up throughout the work. Should it be
tilted with torque converter down, converter may fall off
and cause personal injury.