Table of Contents
Advertisement
G
C
ENERAL
OMMANDS
enable
This command activates Privileged Exec mode. In privileged mode,
additional commands are available, and certain commands display
additional information. See "Understanding Command Modes" on page
17-7.
Syntax
enable [level]
level - Privilege level to log into the device.
The device has two predefined privilege levels: 0: Normal Exec,
15: Privileged Exec. Enter level 15 to access Privileged Exec mode.
Default Setting
Level 15
Command Mode
Normal Exec
Command Usage
"super" is the default password required to change the command
mode from Normal Exec to Privileged Exec. (To set this password, see
the enable password command on page 21-4.)
The "#" character is appended to the end of the prompt to indicate
that the system is in privileged access mode.
Example
Console>enable
Password: [privileged level password]
Console#
Related Commands
disable (18-3)
enable password (21-4)
18-2
Advertisement
Table of Contents
