Chapter 22: General Commands; Enable; Table 22-1 General Commands - SMC Networks TigerStack II SMC8926EM Management Manual

Chapter 22: General Commands

These commands are used to control the command access mode, configuration
mode, and other basic functions.
Command Function

enable

Activates privileged mode
disable Returns to normal mode from privileged mode
configure Activates global configuration mode
show history Shows the command history buffer
reload Restarts the system
prompt Customizes the CLI prompt
end Returns to Privileged Exec mode
exit Returns to the previous configuration mode, or exits the CLI
quit Exits a CLI session
help Shows how to use help
? Shows options for command completion (context sensitive)
enable
This command activates Privileged Exec mode. In privileged mode, additional
commands are available, and certain commands display additional information. See
"Understanding Command Modes" on page 21-6.
Syntax
enable [level]
level - Privilege level to log into the device.
The device has two predefined privilege levels: 0: Normal Exec,
15: Privileged Exec. Enter level 15 to access Privileged Exec mode.
Default Setting
Level 15
Command Mode
Normal Exec
Command Usage
• "super" is the default password required to change the command mode from
Normal Exec to Privileged Exec. (To set this password, see the enable
password command on page 25-3.)

Table 22-1 General Commands

Mode Page
NE 22-1
PE 22-2
PE 22-2
NE, PE 22-3
PE 22-4
GC 22-4
any 22-4
config.
mode
any 22-5
NE, PE 22-5
any NA
any NA
22-1