Chapter 2 Basic Switch Configuration; Commands For Basic Switch Configuration; Command For Basic Configuration - SMC Networks ES4704BD Manual

Chapter 2 Basic Switch Configuration

2.1 Commands for Basic Switch Configuration

Basic switch configuration includes commands for entering and exiting the admin
mode, commands for entering and exiting interface mode, for configuring and displaying
the switch clock, for displaying the version information of the switch system, etc.
Command
Normal User Mode/ Admin Mode
enable
disable
Admin Mode
config [terminal]
Various Modes
exit
Admin Mode
calendar set
<YYYY.MM.DD>
Show version
set default
Write
Reload

2.1.1 Command For Basic Configuration

2.1.1.1 authentication login
Command: authentication login {local | radius | local radius | radius local}
no authentication login
Explanation
The User uses enable command to step into
admin mode from normal user mode. The
disable command is for exiting admin mode.
Enter global mode from admin mode
Exit current mode and enter previous mode,
such as using this command in global mode
to
normal user mode from admin mode
<HH:MM:SS>
Set system date and time
Display version information of the switch
Restore to the factory default
Flash Memory
Save current configuration parameters to
Flash Memory
Hot reset the switch
go back to admin mode, and back to
35