Configuration Commands - SMC Networks 6824MPE INT Management Manual

To enter Privileged Exec mode, enter the following commands and
passwords:
Username: admin
Password: [system login password]
CLI session with the Intelligent Fast Ethernet PoE Switch is
opened.
To end the CLI session, enter [Exit].
Console#
Username: guest
Password: [system login password]
CLI session with the Intelligent Fast Ethernet PoE Switch is opened.
To end the CLI session, enter [Exit].
Console#enable
Password: [privileged level password if so configured]
Console#

Configuration Commands

Configuration commands are privileged level commands used to modify
switch settings. These commands modify the running configuration only and
are not saved when the switch is rebooted. To store the running
configuration in nonvolatile storage, use the copy running-config
startup-config command.
The configuration commands are organized into different modes:
• Global Configuration - These commands modify the system level
configuration, and include commands such as hostname and
snmp-server community.
• Access Control List Configuration - These commands are used for
packet filtering.
• Interface Configuration - These commands modify the port
configuration such as speed-duplex and negotiation.
E C
NTERING OMMANDS
4-9