ST STM32F101 Series Reference Manual page 265

RM0008
Input capture mode
Bits 15:12 IC4F: Input Capture 4 Filter.
Bits 11:10 IC4PSC: Input Capture 4 Prescaler.
Bits 9:8 CC4S: Capture/Compare 4 Selection.
This bit-field defines the direction of the channel (input/output) as well as the used input.
00: CC4 channel is configured as output.
01: CC4 channel is configured as input, IC4 is mapped on TI4.
10: CC4 channel is configured as input, IC4 is mapped on TI3.
11: CC4 channel is configured as input, IC4 is mapped on TRC. This mode is working only if an
internal trigger input is selected through TS bit (TIMx_SMCR register)
Note: CC4S bits are writable only when the channel is OFF (CC4E = '0' in TIMx_CCER).
Bits 7:4 IC3F: Input Capture 3 Filter.
Bits 3:2 IC3PSC: Input Capture 3 Prescaler.
Bits 1:0 CC3S: Capture/Compare 3 Selection.
This bit-field defines the direction of the channel (input/output) as well as the used input.
00: CC3 channel is configured as output.
01: CC3 channel is configured as input, IC3 is mapped on TI3.
10: CC3 channel is configured as input, IC3 is mapped on TI4.
11: CC3 channel is configured as input, IC3 is mapped on TRC. This mode is working only if an
internal trigger input is selected through TS bit (TIMx_SMCR register)
Note: CC3S bits are writable only when the channel is OFF (CC3E = '0' in TIMx_CCER).
General purpose timer (TIMx)
265/501