To Use Measurement Sequence Function |Controlling Charge-Measurement In A Sequence; Selecting The Measurement Sequence Mode; Setting The Measurement Sequence - Agilent Technologies 4339B User Manual

4339B
To Use Measurement Sequence Function
|Controlling charge-measurement in a sequence

Selecting the Measurement Sequence Mode

Press .
Select the desired mode using
Single mode
Single
Continuous mode
Continuous
Measurement sequence OFF (normal measurement mode)
Off

Setting the Measurement Sequence

1. Press . The sequence mode menu will be displayed.
2. Set Charge time.
a. Select using
Chrg
b. Enter the charge time using the numeric ENTRY keys, and press
3. Set Interval time and Number of repetitions ( Cont mode only).
a. Select using
Intvl
b. Enter the interval time using the numeric ENTRY keys, and press
c. Enter the number of measurement points (equivalent to Memory size), and press
4. Select and press
Exit
or and press
or and press
or and press
to exit.
.
.
.
.
.
.
Operating the 4339B 2-15