Roll Paper Cover Removal; Front Cover Removal - Epson StylusPro 10000 Service Manual

EPSON Stylus Pro 10000/10000CF

4.2.1.9 Roll Paper Cover Removal

1. Open the roll cover
2. Remove the upper and lower roll paper with roll shaft.
3. Remove two screws on the left roll holder and remove the left roll holder.
Guide pin
Screw
4. Remove two screws on the right roll holder and remove the right roll holder.
Guide pin
5. Slide the Roll paper cover, then remove it.
Disassembly & assembly
Figure 4-32.
Screw
Figure 4-33.

4.2.1.10 Front Cover Removal

1. Remove the R Side Cover.(Refer to "R Side Cover Removal 124.)
2. Remove the L Side Cover.(Refer to "L Side Cover Removal 124.)
3. Remove the I/C Holder Cover. (Refer to "I/C Holder Cover Removal 125.)
4. Open the Front Cover.
5. Remove two hexagon screws on both side.
6. Remove two screws fixing the Hinge unit L.
Hinge unit L
Disassembly Flow
Hexagon screw
Figure 4-34.
Screw
Figure 4-35.
Revision A
130