Disassembly And Assembly Of The 5-Bin Unit; Front Cover Removal; Rear Cover Removal; Jammed Paper Remove Door Removal - Epson EPL-N2700 Service Manual

EPL-N2700 Optional Units

4.2 Disassembly and Assembly of the 5-Bin Unit

4.2.1 Front Cover Removal

1. Remove the 5-Bin Unit. (Refer to Section 4.1.)
2. Remove four screws (3541) securing the Front Cover to the 5-Bin
Unit, and remove the Front Cover by pulling it forward.
Figure 4-12. Front Cover Removal
5-Bin Unit

4.2.2 Rear Cover Removal

1. Remove the 5-Bin Unit. (Refer to Section 4.1.)
2. Remove four screws (3541) securing the Rear Cover to the 5-Bin
NOTE: If Front/Rear Cover is removed, the Top Cover is also

4.2.3 Jammed Paper Remove Door Removal

1. Remove the Top and Rear Covers. (Refer to Section 4.2.2.)
2. Open the Jammed Paper Removal Door until the sensor flag does
Disassembly and Assembly of the 5-Bin Unit
Unit, and remove the Rear Cover by pulling it to the rear. (See
Figure 4-12.)
removed together.
not interfere with the unit frame and also the door can be removed
from the frame. (viewing from the top, approximately 40 is needed.)
Then, remove the door by moving it upward.
Figure 4-13. Jammed Paper Remove Door Removal
Revision A
80