Front Cover Removal - Epson EPL-9000 Service Manual

Disassembly and Assembly

Front Cover Removal

3.2.4.5
1. Remove the tray. (Refer to Section 324.13.)
Remove the rear cover. (Refer to Section 3.2.1.1.)
2.
Remove top cover.
3.
Remove the left cover.
4.
Remove the right cover. (Refer to Section 3.2.1.4.)
5.
Remove the ELEC cover. (Refer to Section 3.2.2.1.)
6.
Remove the link assembly. (Refer to Section 3.2.4.1.)
7.
Disconnect connector
8.
connector
9.
10.
11.
Remove screw
Figure 3-27. Removing the Front Cover (1)
12. Remove 2 screws
Remove the retard pad from front cover.
13.
Figure 3-28. Removing the Front Cover (2)
3-18
to Section 3.2.1.2.)
to 3.2.1.3.)
from the MCU PWB board.
from the EXIT sensor on the fusing unit.
and from the
6) securing the earth wire to the front frame.
x
6) securing the front cover, and remove it.
x
Manual
Rev.