Paper Eject Drive Unit Removal - Epson Stylus 1500 Service Manual

Paper Eject Drive Unit Removal

1. Remove the printer mechanism. (See page 3-9.)
2. Remove the carriage unit. (See 3-22.)
3. Remove the paper eject frame unit. (See page 3-24.)
4. Remove the base frame. (See page 3-26.)
5. Remove the left paper eject assembly stopper, and move the left and right paper eject
assemblies to the notches on the right side of the paper eject drive unit. Then remove the
assemblies by pulling them forward.
6. Turn the paper feed roller unit clockwise with the knob, moving the trigger lever on the right
end of paper feed roller to set the hopper assembly to the lowest position. (The trigger lever is
shown in Figure 3-24.)
Remove the (CBP 3 × 8) screw securing the paper eject drive unit to the left frame and then
7.
remove the paper eject drive unit.
Paper Feed Roller Unit
CBP 3 x 8
Left Paper Eject Assembly
Figure 3-24. Removing the Paper Eject Drive Unit
EPSON Stylus 1500 Service Manual
Paper Eject Drive Unit
Eject Paper Assembly Stopper
Pickup Roller Unit
Right Paper Eject Assembly
Disassembly and Assembly
No tch e s
Trigger Lever
Ho p p er Asse mb ly
3-27