Waste Ink Pad / Waste Ink Tray Assy - Epson Stylus Office T1110 Service Manual

_______________________________________________________________________________________
WorkForce 1100/Epson Stylus Office T1110/B1100/T1100/Epson ME Office 1100

4.4.10 Waste Ink Pad / Waste Ink Tray Assy

1. Remove the Printer Mechanism.
Mechanism (p.86).)
2. Peel off the Pad Stopper Sheet from the Lower Housing.
3. Remove the four Waste Ink Pads from the sections indicated with A to D of the
Lower Housing.
B
D
Figure 4-101. Removing the Waste Ink Pad
Attach the Pad Stopper Sheet as shown below.
Figure 4-102. Reinstalling the Pad Stopper Sheet
Referring to Figure
Pads.
_______________________________________________________________________________________
打印机维修论坛 http://www.printerwhy.net/
Disassembly And Assembly
高速行式打印机 http://www.lineprinter.com.cn/
(Refer to 4.4.4 Lower Housing / Printer
Pad Stopper Sheet
A
C
Pad Stopper Sheet
23mm ± 5mm
4-101, correctly attach the four Waste Ink
Disassembling the Printer Mechanism
4. Release the tab that secure the Waste Ink Tray Assy, and remove the Waste Ink
Tray Assy from the Lower Housing.
Lower Housing
Rib Waste Ink Tray Assy
Figure 4-103. Removing the Waste Ink Tray Assy
Install the Waste Ink Tray Assy under the rib of the Lower
Housing.
Route the Waste Ink Tube through the three grooves of the
Lower Housing.
Figure 4-104. Routing the Waste Ink Tube
打印机驱动下载 http://www.printerwhy.com/
Revision A
Tab
Waste Ink Tube
Lower Housing
Confidential
Groove
104