Paper Exit; Exit Tray Assembly Removal (Pl10.1.10); Exit Upper Assembly Removal (Pl10.1.2) - Epson ColorPage EPL-C8000 Service Manual

EPSON EPL-C8000

3.2.13 Paper Exit

3.2.13.1 EXIT TRAY ASSEMBLY Removal (PL10.1.10)

1. Push the hinge at the rear end of the EXIT TRAY ASSEMBLY
inward to release the peg from the FUSER TRAY. Then release the
front peg and remove the EXIT TRAY ASSEMBLY.
Rear
Front
Figure 3-116. EXIT TRAY ASSEMBLY Removal (PL10.1.10)
When installing the EXIT TRAY ASSEMBLY, hang the
hinge spring longer end to the outer side of the frame.
Chapter 3 Disassembly and Assembly/Adjustment

3.2.13.2 EXIT UPPER ASSEMBLY Removal (PL10.1.2)

1. Open the exit upper assembly.
NOTE: In the following step, be careful not to break the hinge in the
EXIT UPPER ASSEMBLY.
2. Push the front hinge part of the EXIT UPPER ASSEMBLY inward to
release it from the peg on the EXIT LOWER ASSEMBLY. Then
release the rear hinge and remove the EXIT UPPER ASSEMBLY.
Figure 3-117. Figure 3-94. EXIT UPPER ASSEMBLY Removal
Revision B
3-98