2Nd Btr Assembly Removal (Pl8.1.20) - Epson ColorPage EPL-C8000 Service Manual

EPSON EPL-C8000

3.2.11.5 2ND BTR ASSEMBLY Removal (PL8.1.20)

1. Remove the FUSER ASSEMBLY with the EXIT TRAY ASSEMBLY
and the OIL ROLL ASSEMBLY installed on it. (See Section
3.2.12.2.)
2. Remove the BELT CLEANER ASSEMBLY. (See Section 3.2.11.4.)
NOTE: In the following step, do not touch the IBT BELT ASSEMBLY
and the 2ND BTR ASSEMBLY. Also do not get any other
parts touch the 2ND BTR ASSEMBLY.
3. Take the 2ND BTR ASSEMBLY out from the left side of the printer.
n After replacing the 2ND BTR ASSEMBLY with a new
one, perform "2ND BTR Reset". (See Section 6.2 in
Chapter 6 "Maintenance".)
n When installing the 2ND BTR ASSEMBLY, push it all
the way into the printer.
Chapter 3 Disassembly and Assembly/Adjustment
Figure 3-84. 2ND BTR ASSEMBLY Removal
Revision B
3-71