Installing the MX2020 Extended EMI Cover
Copyright © 2015, Juniper Networks, Inc.
Figure 217: Removing the Extended EMI Cover Mounting Brackets
0
Two extended electromagnetic interference (EMI) covers attach to the router over the
upper and lower card cages.
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
1.
the strap to one of the ESD points on the chassis.
On each side of the upper and lower card cage, orient the extended EMI cover mounting
2.
brackets so that they line up with the mounting holes.
For the upper extended EMI card cover, the groove that holds the points on the cover
should be at the top.
Chapter 25: Replacing Components
469