Figure 101: Installing Winch Strap Plate - Juniper MX2020 Hardware Manual

MX2020 3D Universal Edge Router Hardware Guide
230
CAUTION: Before front mounting the router in a rack, have a qualified
technician verify that the rack is strong enough to support the router's weight
and is adequately supported at the installation site.
To install the MX2020 using a router transport kit:
Install the winch strap plate to the rear of the router using the four captive screws,
1.
and tighten (see Figure 101 on page

Figure 101: Installing Winch Strap Plate

Using a four person team, transport the router to the rack installation location and
2.
center it in front of the mounting shelf. See
Guidelines Using a Router Transport Kit" on page
230).
"MX2020 Moving Requirements and
113.
Copyright © 2015, Juniper Networks, Inc.