Connection To The Building Structure; Mx2020 Moving Requirements And Guidelines Using A Router Transport Kit; Router Transport Kit Turning Radius - Juniper MX2020 Hardware Manual

Connection to the Building Structure

Related
Documentation

MX2020 Moving Requirements and Guidelines Using a Router Transport Kit

Router Transport Kit Turning Radius

Copyright © 2015, Juniper Networks, Inc.
Always secure the rack to the structure of the building. If your geographical area is subject
to earthquakes, bolt the rack to the floor. For maximum stability, also secure the rack to
ceiling brackets.
Clearance Requirements for Airflow and Hardware Maintenance for the MX2020 Router
on page 121
MX2020 Rack-Mounting Hardware on page 50
MX2020 Cabinet Size and Clearance Requirements on page 106
MX2020 Cabinet Airflow Requirements on page 105
MX2020 Moving Requirements and Guidelines Using a Router Transport Kit on page 113
Router Transport Kit Turning Radius on page 113
Router Transport Kit Requirements on page 114
The MX2020 requires a minimum 42 in. (106.7 cm) diameter of space to turn the chassis
on the router transport kit (see
NOTE: The router transport kit handles can be removed to accommodate
aisle width.
Chapter 10: Planning and Preparing the Site
Figure 53 on page 114.
113