Related
Documentation
Replacing the MX2020 Air Baffle
Removing the MX2020 Air Baffle
Copyright © 2015, Juniper Networks, Inc.
Figure 223: Installing Lower Fan Trays
Preventing Electrostatic Discharge Damage to an MX2020 Router on page 558
Maintaining the MX2020 Fan Trays on page 345
Removing the MX2020 Air Baffle on page 475
1.
Installing the MX2020 Air Baffle on page 476
2.
To remove the air baffle—MX2000-UPR-BAFFLE:
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
1.
the strap to one of the ESD points on the chassis.
Loosen the four captive screws located on either side of the air baffle that is attached
2.
to the upper fan tray access door.
Grasp the air baffle, and pull straight out from the upper fan tray access door as shown
3.
in
Figure 224 on page
476.
Chapter 25: Replacing Components
475