Tools And Parts Required To Remove Components From An Mx2020 Router; Replacing An Mx2020 Cb-Re - Juniper MX2020 Hardware Manual

3d universal edge router

Hide thumbs Also See for MX2020:

Table of Contents

MX2020 3D Universal Edge Router Hardware Guide

Tools and Parts Required to Remove Components from an MX2020 Router

Documentation

To remove components from the router or the router from a rack, you need the following

tools and parts:

2.5-mm flat-blade (–) screwdriver, for detaching alarm relay terminal block

7/16-in. (11 mm) nut driver

Blank panels to cover empty slots

EMI (electromagnetic interference) covers—shipped with router

Electrostatic bag or antistatic mat, for each component

Electrostatic discharge (ESD) grounding wrist strap

Flat-blade (–) screwdriver

Pallet jack with attachment—recommended

Router transport kit—recommended (optional)

Phillips (+) screwdrivers, numbers 1, 2, and 3

Rubber safety cap for fiber-optic interfaces or cable

Wire cutters

Packing the MX2020 Router for Shipment on page 409

Contacting Customer Support on page 549

Removing an MX2020 CB-RE on page 419

Installing an MX2020 CB-RE on page 420