Related
Documentation
Replacing the MX2020 Cable Managers
Copyright © 2015, Juniper Networks, Inc.
Figure 190: Installing the PSM Air Filter
Preventing Electrostatic Discharge Damage to an MX2020 Router on page 558
Maintaining the MX2020 Air Filter on page 341
The MX2020 router consist of an upper, middle card-cage, lower, and DC cable
management system used for routing and securing cables away from system components.
There are two types of cable management systems: standard and extended. The following
instructions represent both.
NOTE:
The middle card-cage cable manager is permanently installed on the
MX2020 system chassis, and cannot be removed.
1.
Removing the MX2020 Upper Cable Manager on page 438
Removing the MX2020 Lower Cable Manager on page 438
2.
Removing the MX2020 DC Cable Manager on page 439
3.
Installing the MX2020 Lower Cable Manager on page 440
4.
Chapter 25: Replacing Components
437