Installing A Mx2020 Router Using A Router Transport Kit Overview; Installing The Router Transport Kit On The Mx2020 Router - Juniper MX2020 Hardware Manual
3d universal edge router
Hide thumbs
Also See for MX2020:
- Hardware manual (454 pages) ,
- Hardware manual (800 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
MX2020 3D Universal Edge Router Hardware Guide
Related
Documentation
Installing a MX2020 Router Using a Router Transport Kit Overview
Installing the Router Transport Kit on the MX2020 Router
224
NOTE:
There must be a minimum of 45 U of usable rack space when
installing the MX2020 router into a 45-U rack.
Move the pallet jack away from the rack.
12.
Visually inspect the alignment of the router. If the router is installed properly in the
13.
rack, all the mounting screws on one side of the rack should be aligned with the
mounting screws on the opposite side, and the router should be level.
Insert sixteen mounting screws (eight on each side) into the mounting holes to secure
14.
the router to the rack.
Overview of Preparing the Site for the MX2020 Router on page 103
Tools Required to Install the MX2020 Router Using a Pallet Jack on page 191
Installing the Pallet Jack Attachment on page 219
Removing Components from the MX2020 Router Chassis Before Installing It In a Rack
on page 209
Reinstalling Components in the MX2020 Chassis After Installing It In a Rack on page 236
Because of the MX2020 router's size and weight—1,515 lb (687.19 kg) depending on the
configuration—we strongly recommend that you install the router using either the router
transport kit or a pallet jack (see
Attachment" on page 220
for more information on installing the router with the pallet jack.
Gather the tools required to install the router. See:
1.
Tools Required to Install the MX2020 Router Using a Router Transport Kit on page 191
Install the router transport kit. See:
2.
Installing the MX2020 Router Using a Router Transport Kit on page 229
Secure the router to the router transport platform. See:
3.
Securing the MX2020 Router to the Router Transport Platform on page 226
Install the MX2020 using the router transport kit. See:
4.
Installing the MX2020 Router Using a Router Transport Kit on page 229
Reinstall the components. See:
5.
Reinstalling Components in the MX2020 Chassis After Installing It In a Rack on page 236
The router transport kit includes the following components:
"Installing the MX2020 Router Using a Pallet Jack with
Copyright © 2015, Juniper Networks, Inc.
Advertisement
Table of Contents
Troubleshooting
