Figure 125: Selecting Dc Power Subsystem Feed Redundancy; Figure 126: Mx2020 Router With Dc Power Supply Modules Installed - Juniper MX2020 Hardware Manual

MX2020 3D Universal Edge Router Hardware Guide
266

Figure 125: Selecting DC Power Subsystem Feed Redundancy

PWR OK FAULT
INP0 INP1
Using both hands, grasp the handle and slide the PSM straight into the chassis until
3.
the PSM is fully seated in the chassis slot. Tighten the two captive screws (see
Figure 126 on page 266). Apply between 10 lb-in. (1.13 Nm) to 12 lb-in. (1.35 Nm) of
torque to each screw. Do not overtighten the screws.

Figure 126: MX2020 Router with DC Power Supply Modules Installed

ON
0 1
Copyright © 2015, Juniper Networks, Inc.