Devices; Tn Power Warning For Mx2020 Routers - Juniper MX2020 Hardware Manual
3d universal edge router
Hide thumbs
Also See for MX2020:
- Hardware manual (454 pages) ,
- Hardware manual (800 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
Related
Documentation
General Electrical Safety Guidelines and Electrical Codes for Juniper Networks Devices
Related
Documentation
TN Power Warning for MX2020 Routers
Copyright © 2015, Juniper Networks, Inc.
DC Power Electrical Safety Warnings for Juniper Networks Devices on page 586
Install the router in compliance with the following local, national, or international
electrical codes:
United States—National Fire Protection Association (NFPA 70), United States
National Electrical Code.
Canada—Canadian Electrical Code, Part 1, CSA C22.1.
Other countries—International Electromechanical Commission (IEC) 60364, Part 1
through Part 7.
Locate the emergency power-off switch for the room in which you are working so that
if an electrical accident occurs, you can quickly turn off the power.
Do not work alone if potentially hazardous conditions exist anywhere in your workspace.
Never assume that power is disconnected from a circuit. Always check the circuit before
starting to work.
Carefully look for possible hazards in your work area, such as moist floors, ungrounded
power extension cords, and missing safety grounds.
Operate the router within marked electrical ratings and product usage instructions.
For the router and peripheral equipment to function safely and correctly, use the cables
and connectors specified for the attached peripheral equipment, and make certain
they are in good condition.
Many router components can be removed and replaced without powering off or
disconnecting power to the router. Never install equipment if it appears damaged.
In Case of an Electrical Accident
WARNING:
The router is designed to work with TN power systems.
Waarschuwing Het apparaat is ontworpen om te functioneren met TN
energiesystemen.
Varoitus Koje on suunniteltu toimimaan TN-sähkövoimajärjestelmien
yhteydessä.
Attention Ce dispositif a été conçu pour fonctionner avec des systèmes
d'alimentation TN.
Warnung Das Gerät ist für die Verwendung mit TN-Stromsystemen ausgelegt.
Chapter 34: Electrical Safety Guidelines and Warnings
583
Advertisement
Table of Contents
Troubleshooting
