Mx2020 Ac Power Cord Specifications; Table 52: Three-Phase Delta And Wye Ac Power Cord Specifications - Juniper MX2020 Hardware Manual

MX2020 3D Universal Edge Router Hardware Guide
Related
Documentation

MX2020 AC Power Cord Specifications

154
Table 51: MX2020 FRU AC Power Requirements (continued)
Component
DS3/E3 MIC
Channelized OC3/STM1
(Multi-Rate) Circuit
Emulation MIC with SFP
MX2020 Power Subsystem Description on page 83
Connecting AC Power to an MX2020 Router with Three-Phase Delta AC Power
Distribution Modules on page 249
Connecting AC Power to an MX2020 Router with Three-Phase Wye AC Power
Distribution Modules on page 252
MX2020 AC Power Subsystem Electrical Specifications on page 158
MX2020 AC Power Cord Specifications on page 154
MX2020 AC Power Electrical Safety Guidelines on page 584
Most sites distribute power through a main conduit that leads to frame-mounted power
distribution panels, one of which can be located next to the rack that houses the router.
An AC power cord connects each PDM to the power distribution panel.
For more information on AC PDM input power mapping, see
AC Power Distribution Modules to AC Power Supply Modules on the MX2020 Router" on
page 168.
Detachable AC power cords, each 4.5 m (approximately 14.8 ft) long, are supplied with
the router. The AC power cord wires insert into the AC input terminal block by screwdriver.
The plug end of the power cord fits into the power source receptacle for your geographical
location.
Table 52 on page 154 and
Figure 63 on page 155 and
provided for each region supported.

Table 52: Three-Phase Delta and Wye AC Power Cord Specifications

Country
North America
Model Number
MIC-3D-8DS3-E3
MIC-3D-8CHDS3-E3-B
MIC-3D-4COC3-1COC12-CE
Table 53 on page 155 provide specifications and
Figure 64 on page 156 depict the plug on the AC power cord
Model Number
CBL-MX2000-3PH-DELTA
Maximum Power
Requirement
36 W at 55° C
35 W at 40° C
34 W at 25° C
33.96 W
"Mapping Input Power from
Copyright © 2015, Juniper Networks, Inc.