Unpacking The Router Transport Kit; Figure 80: Router Transport Kit Crate Dimensions - Juniper MX2020 Hardware Manual

Related
Documentation

Unpacking the Router Transport Kit

Copyright © 2015, Juniper Networks, Inc.
Table 75: Accessory Box Parts List (continued)
Part
9" x 12" pink bag, ESD
Accessory Box, 19 x 12 x 3"
Ethernet cable, RJ-45/RJ-45, 4-pair stranded UTP,
Category 5E, 15 feet long
ESD wrist strap with cable
Tools and Parts Required to Unpack the MX2020 Router on page 190
Unpacking the MX2020 Router on page 195
MX2020 Router Overview on page 3
The router transport kit is shipped in a wooden crate. A wooden pallet forms the base of
the crate. Metal clips secure the top and front of the crate in place.
The router transport kit shipping container measures 36 in. (91.4 cm) high, 32 in. (81.3 cm)
wide, and 44.5 in. (113 cm) deep (see
container containing the router transport kit is 200 lb (90.71 kg).

Figure 80: Router Transport Kit Crate Dimensions

Crate door/ramp
3 ft
(91.44 cm)
3 ft
(91.44 cm)
3 ft
(91.44 cm)
NOTE: The router transport kit is maximally protected inside the shipping
crate. Do not unpack it until you are ready to begin installation.
Chapter 16: Unpacking the Router
Quantity
2
1
1
1
Figure 80 on page 201). The total weight of the
44.5 in
(113 cm)
32 in
(81.3 cm)
36 in.
(91.4 cm)
3 ft
(91.44 cm)
201