Installing The Mx2020 Air Filter; Figure 146: Installing An Adc - Juniper MX2020 Hardware Manual

MX2020 3D Universal Edge Router Hardware Guide
Related
Documentation

Installing the MX2020 Air Filter

296
Slide the ADC all the way into the card cage until you feel resistance.
6.
Grasp both ejector handles, and gently close them inward simultaneously until the
7.
ADC is fully seated.
Issue the following CLI command to bring the ADC online:
8.
user@host>request chassis fdc slot slot-number online
For more information about the command, see the
Command Reference .
NOTE: When issuing the
gain power, and the system total power will decrease.

Figure 146: Installing an ADC

0
10
11
12
13
14
15
16
17
18
19
MX2020 Adapter Card (ADC) Description on page 67
Maintaining the MX2020 Adapter Cards on page 338
Removing an MX2020 Adapter Card on page 489
To install the lower air filter—MX2020-FLTR-KIT-S:
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
1.
the strap to one of the ESD points on the chassis.
Ensure that the air filter is right side up.
2.
Junos OS System Basics and Services
command, the FRU will
request chassis fdc online
Copyright © 2015, Juniper Networks, Inc.