Figure 164: Installing A Mic - Juniper MX2020 Hardware Manual

Related
Documentation
Copyright © 2015, Juniper Networks, Inc.
CAUTION: Avoid bending fiber-optic cable beyond its minimum bend
radius. An arc smaller than a few inches in diameter can damage the cable
and cause problems that are difficult to diagnose.
Use one of the following methods to bring the MIC online:
11.
Press the MIC offline/online button until the MIC
Issue the following CLI command:
user@host> request chassis mic fpc-slot fpc-slot mic-slot mic-slot online
For more information about the command, see the
Services Command Reference
The normal functioning status LED confirms that the MIC is online. You can also verify
correct MIC functioning by issuing the
in "Maintaining MX2020 MICs" on page

Figure 164: Installing a MIC

0
Preventing Electrostatic Discharge Damage to an MX2020 Router on page 558
Removing an MX2020 MIC on page 477
Installing an MX2020 Dual-Wide MIC on page 306
Chapter 22: Installing and Replacing Components
.
show chassis fpc pic-status
374.
19
LED lights green.
OK/FAIL
Junos OS System Basics and
command described
317