Tools And Parts Required To Unpack The Mx2020 Router - Juniper MX2020 Hardware Manual

MX2020 3D Universal Edge Router Hardware Guide
Related
Documentation

Tools and Parts Required to Unpack the MX2020 Router

Related
Documentation
190
Installing a MX2020 Router Using a Router Transport Kit Overview on page 224
Ground the router. See:
7.
See: "Grounding the MX2020 Router" on page 247
Reinstall all components. See:
8.
Reinstalling Components in the MX2020 Chassis After Installing It In a Rack on
page 236
Connect cables to the network and external devices. See:
9.
Connecting the MX2020 Router to Management and Alarm Devices on page 275
Connect the AC power cord or DC power cables. See:
10.
Installing MX2020 AC Power Supply Modules on page 258
Connecting AC Power to an MX2020 Router with Three-Phase Delta AC Power
Distribution Modules on page 249
Connecting AC Power to an MX2020 Router with Three-Phase Wye AC Power
Distribution Modules on page 252
Installing MX2020 DC Power Supply Modules on page 265
Connecting Power to a DC-Powered MX2020 Router with Power Distribution
Modules on page 262
Power on the router. See:
11.
Powering On the AC-Powered MX2020 Router on page 260
Powering On the DC-Powered MX2020 Router on page 273
Perform the initial system configuration. See:
12.
Initially Configuring the MX2020 Router on page 287
MX2020 Chassis Description on page 5
Routine Maintenance Procedures for the MX2020 Router on page 407
MX2020 Troubleshooting Resources on page 531
To unpack the router and prepare for installation, you need the following tools:
Phillips (+) screwdriver, number 1, 2, and 3
1/2-in. or 13 mm open-end or socket wrench to remove bracket bolts from the shipping
pallet
Blank panels to cover any slots not occupied by a component
Unpacking the MX2020 Router on page 195
Copyright © 2015, Juniper Networks, Inc.