Mx2020 Mpc Terminology; Mx2020 Modular Interface Card Description; Figure 35: Mpc Edges - Juniper MX2020 Hardware Manual

MX2020 MPC Terminology

Related
Documentation

MX2020 Modular Interface Card Description

Copyright © 2015, Juniper Networks, Inc.
Regardless of whether you are holding an MPC vertically or horizontally, this information
uses the same terms for all four edges of the MPC (see
Faceplate—Edge of the MPC that has connectors into which you insert the SFP or XFP
transceivers
Connector edge—Edge opposite the faceplate; this edge has the connectors that attach
to the midplane
Top edge—Edge at the top of the MPC when it is vertical
Bottom edge—Edge at the bottom of the MPC when it is vertical

Figure 35: MPC Edges

MX2020 Modular Port Concentrator Description on page 68
MX2020 Component LEDs on the Craft Interface on page 39
Holding an MX2020 MPC on page 404
Troubleshooting the MX2020 MPCs on page 538
Replacing an MX2020 MPC on page 485
The Modular Interface Cards (MICs) install into the Modular Port Concentrators (MPCs)
and provide the physical connections to various network media types. MICs allow different
Chapter 8: Interface Modules—ADCs, MPCs, and MICs
Figure 35 on page 73):
73