Installing And Replacing Components; Installing An Mx2020 Ac Power Supply Module - Juniper MX2020 Hardware Manual

3d universal edge router

Hide thumbs Also See for MX2020:

Table of Contents

Installing and Replacing Components

Installing an MX2020 AC Power Supply Module on page 293

Installing an MX2020 Adapter Card on page 295

Installing the MX2020 Air Filter on page 296

Installing the MX2020 Craft Interface on page 299

Installing an MX2020 Extended Craft Interface on page 300

Installing an MX2020 CB-RE on page 301

Installing the MX2020 DC Cable Manager on page 303

Installing an MX2020 DC Power Supply Module on page 305

Installing an MX2020 Dual-Wide MIC on page 306

Installing the MX2020 Standard EMI Covers on page 308

Installing the MX2020 Extended EMI Cover on page 309

Installing an MX2020 Fan Tray on page 312

Installing the MX2020 Air Baffle on page 313

Installing the MX2020 Lower Cable Manager on page 314

Installing an MX2020 MIC on page 315

Installing an MX2020 SFB on page 318

Installing an MX2020 Three-Phase Delta AC Power Distribution Module on page 323

Installing an MX2020 Three-Phase Wye AC Power Distribution Module on page 328

Installing the MX2020 Upper Cable Manager on page 332

Installing an SFP or XFP Transceiver into an MX2020 MPC or MIC on page 333

Before you install a PSM, be aware of the following:

The AC PSM is hot-swappable when a minimum number of PSMs

installed and operational.